IKO Windows & Doors Nationwide

IKO Windows & Doors: The Irvine Owner’s Guide

We stock and install IKO-compatible windows and doors across Irvine, with most replacement projects running $4,500-$15,000 for full window replacement and $8,000-$25,000 for impact-rated installations depending on the series and opening count. Many IKO parts are available same-day through our supply chain, and we carry common hardware, sash balances, and weatherstripping profiles on our trucks. Homeowners usually notice the problem first as a draft they can’t trace, a window that won’t stay open, or condensation between panes that won’t wipe away.

Call (657) 227-2502

Which IKO Models This Applies To

IKO’s window and door lines have shifted over the past two decades, and the part you need depends on the vintage. Pre-2015 units often carry the IKO Gold Series or Silver Series labels, found on a sticker in the top track of sliding windows or the hinge side of casements. Newer production uses the ProSeries and UltraView designations, with a 10-digit model code stamped into the spacer bar between glass panes. The critical compatibility gotcha: IKO changed its sash balance width from 5/8-inch to 3/4-inch in 2018, and the wrong size will bind in the jamb. We source OEM IKO hardware where it’s still manufactured, and where IKO has discontinued a part, we specify equivalents from AmesburyTruth or Caldwell that match the original operating force and cycle rating. For Irvine’s coastal-influenced climate, we generally recommend staying with OEM weatherstripping formulations rather than generic replacements, since the salt air degrades standard EPDM faster than the IKO-specified Santoprene blend.

Signs Your IKO Windows & Doors Is Failing

• The window drifts closed or won’t stay open. This points to a failed sash balance, the spring-loaded counterweight inside the jamb track. In Irvine’s dry summers, the lubricant dries and the coil fatigues; we see this most often in south-facing units that bake from 10 a.m. to 4 p.m.
• Visible moisture or fog between the glass panes. The insulated glass unit (IGU) seal has failed, releasing the argon fill and allowing condensation. Once the desiccant saturates, the fog becomes permanent and the thermal performance drops to that of a single pane.
• Air leaks around the frame or sash, even when closed and locked. Compression weatherstripping loses its memory after 8-12 years in California UV, and the pile seal on sliding tracks flattens out. The leak is usually worst on the prevailing-wind side of the house.
• Difficulty locking or unlocking, or a misaligned sash. Hinge arms on casement windows wear at the pivot pin, and the keep (the strike plate) shifts as the frame settles. Forced closure bends the mechanism further.
• Cracking, warping, or delamination of the frame material. IKO’s vinyl compounds hold up well, but dark-colored frames in direct sun can exceed 140°F surface temperature, accelerating thermal expansion stress. We see this in Orchard Hills and Shady Canyon installations with minimal overhang.

Before

After

Replacement Cost & What’s Included

For IKO window and door work in Irvine, our installed pricing breaks down as follows:

The range reflects unit size, floor level (second-story carries ladder and scaffolding time), and whether the existing frame is square and sound. Every quote is a flat written price with a written scope, delivered before work starts, under Clause 1 of The Haven Standard. Our 365-Day Done Right Promise covers the installation and hardware; IKO’s own glass warranty runs 20 years on most IGUs. We pull permits where Irvine requires them, typically on new-construction-grade replacements or any structural modification to the opening.

DIY or Call Us?

There’s a clear line here. An owner can safely check the model label, measure the visible glass dimensions, and verify that the lock engages fully - that’s useful information to have when you call. What we don’t recommend: removing a sash balance under tension, cutting out an IGU without understanding the glazing stops, or adjusting hinges on a casement while the sash is unsupported. The balance spring stores significant energy, and an uncontrolled release can damage the jamb or worse. We’ve also seen homeowners break the thermal break in an aluminum frame by forcing a misaligned sash. If you’re holding a part number and want confirmation it matches your series, call us. If the window is stuck, leaking, or the glass is compromised, the repair needs a trained technician with the right tools and the liability coverage. Under The Haven Standard, every visit includes a documented photo record of what we found and what we did, so you have evidence of the condition, not just our word.

FAQs