Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Irvine Owner’s Guide
Boral concrete and clay tile roofing repair in Irvine typically runs $600-$2,500 installed, depending on whether we’re replacing individual tiles, underlayment sections, or flashing assemblies. We stock Boral-compatible tiles, fasteners, and color-matched sealants on our trucks, and most Boral repairs in the Irvine area are completed in a single visit. Most homeowners discover a problem after a Santa Ana wind event or the first heavy winter rain, when a few displaced tiles or a slow ceiling stain reveal that the underlayment beneath has aged past its service life.
Which Boral Models This Applies To
Boral’s U.S. roofing line includes concrete profiles like Saxony Slate, Saxony Split Shake, and Villa concrete tile, plus clay offerings in the Barcelona and Mission styles. Each profile has a specific fastening pattern and overlap dimension, so a Saxony Slate replacement tile won’t seat correctly on a Villa profile roof. The model name is usually molded into the underside of the tile or printed on a faded label near the ridge; if you can’t read it, a width measurement across the exposed face and the nose-to-nail dimension will narrow it down.
We carry both OEM Boral tiles and quality aftermarket equivalents from Eagle Roofing and US Tile, depending on what your HOA or original builder spec’d. In Irvine’s planned communities, especially around Orchard Hills and Northwood, we’ve seen HOA architectural committees reject non-OEM color matches, so we verify compatibility against your original spec sheet before ordering. The aftermarket tiles we use meet the same ASTM C1492 concrete or ASTM C1167 clay standards; the difference is usually color lot consistency and whether the HOA cares.
Signs Your Boral Roofing Is Failing

- Cracked or broken tiles, especially along the rake edges. Boral concrete tiles handle UV well, but thermal cycling between 105°F August afternoons and 50°F winter mornings eventually fatigues the nose and lug areas. Once the fastener hole cracks, the tile loses wind uplift resistance.
- Water stains on ceiling drywall after rain. Boral tile roofs rely on the underlayment as the primary water barrier; the tile itself sheds most water but isn’t waterproof. When the underlayment reaches 20-25 years in Irvine’s sun, it embrittles and tears at fastener penetrations.
- Granule accumulation in gutters or at downspout outlets. On Boral concrete tiles, this indicates surface erosion from acid rain or salt air exposure, common within a few miles of the coast in Irvine’s Turtle Rock or Quail Hill neighborhoods. The tile is thinning and will soon lose its protective skin.
- Lifted or bellied tiles in straight lines. This pattern usually tracks the underlayment seam below, where two rolls meet and the tape adhesive has failed. Wind drives rain straight into the gap.
- Daylight visible through the roof deck from the attic. Missing or shifted tiles are the obvious cause, but we’ve also found this where Boral ridge tiles were foam-adhered instead of mechanically fastened and the foam has degraded.
Before
AfterReplacement Cost & What’s Included
For Boral tile roof repair in Irvine, our installed pricing breaks down as follows:
| Scope | Price Range |
|---|---|
| Individual tile replacement (up to 10 tiles) | $600-$1,200 |
| Tile replacement + underlayment patch (up to 100 sq ft) | $1,200-$2,100 |
| Full underlayment replacement, tile-off (per square) | $400-$650 |
| Ridge/hip tile and foam replacement (linear foot) | $35-$55 |
The range depends on roof pitch (steeper = more labor), tile accessibility, and whether we need to match a discontinued Boral color lot. Under Clause 1 of the Haven Standard, you get a written line-item price before any work starts, and that number doesn’t change unless you sign a change order. Our 365-Day Done Right Promise covers the repair; if a tile we set fails or the patch leaks, we make it right at no charge. Every visit includes a documented photo record of the damage, the repair, and the finished condition.
DIY or Call Us?

Here’s where the line sits. A homeowner can safely walk the roof on a low-slope Boral installation to photograph damage for our review, or check the attic for daylight and moisture stains. What you should not attempt: lifting tiles to inspect underlayment (the adjacent tiles chip easily), walking a pitch over 6:12 without proper fall protection, or applying sealants from a hardware store that will void any remaining Boral warranty and trap moisture.
The real risk with Boral tile isn’t the tile itself, it’s the underlayment system beneath. Misdiagnosing a few cracked tiles as the whole problem, when the actual failure is degraded felt at the fasteners, means you’ll be back up there in six months. We’ve done enough of these in Irvine to read the pattern. Call (657) 227-2502 and we’ll scope it properly.
FAQs
The tiles themselves often reach 50+ years, but the underlayment beneath typically needs attention at 20-25 years due to UV and thermal cycling. In coastal Irvine microclimates with salt air, we’ve seen underlayment fatigue closer to 18 years. Call (657) 227-2502 for a free inspection and exact condition report.
Individual tiles cannot be “repaired” in any meaningful way; cracked concrete or clay is replaced. Small chips at the nose can sometimes be color-matched and sealed for cosmetic purposes, but this doesn’t restore structural integrity. We stock replacement tiles and can match most Boral color lots. Call (657) 227-2502 for an exact quote, estimates are free.
Most single-area repairs, tile replacement plus underlayment patch, are completed in four to six hours. Full underlayment replacement on a typical Irvine tract home runs two to three days, including tile removal, deck inspection, and reinstallation. We don’t quote speed; we quote completion with a written scope. Call (657) 227-2502 to schedule.
We stock Boral-compatible concrete and clay tiles in the most common Irvine profiles and colors, plus underlayment, fasteners, and foam adhesive. For discontinued colors or specialty blends, we order direct and typically receive within three to five business days. We’ll tell you exactly what’s on the truck before we schedule. Call (657) 227-2502 to confirm availability for your profile.
Rowan Construction Group Irvine is an independent service provider and is not affiliated with Boral. We source Boral-compatible and equivalent products through our network of fifty-plus vetted material brands.
Measure twice, build it once, write it down. That’s how Grant Rowan built this company, and it’s how we handle every Boral roof we touch in Irvine.
Written by Grant Rowan, Owner, Rowan Construction Group Irvine at Rowan Construction Group Irvine, serving Irvine and nearby areas.







Before
After
Before
After
Before
After