Cambridge Pavers Kitchen Remodeling Nationwide

Cambridge Pavers Kitchen Remodeling: The Irvine Owner’s Guide

Cambridge Pavers kitchen remodeling in Irvine typically runs $14,000-$45,000 installed, with most projects in the $18,000-$28,000 range for a full footprint using Cambridge’s ArmorTec or Olde World collections. We stock Cambridge Pavers-compatible materials and can usually begin demolition within two weeks of signed scope. Homeowners usually discover their existing hardscape is failing when grout lines crack after winter rains, pavers settle unevenly near the kitchen’s exterior access, or the original installer used a sand base instead of the compacted aggregate Cambridge specifies.

Call (657) 227-2502

Which Cambridge Pavers Models This Applies To

Cambridge Pavers produces several lines relevant to kitchen remodeling in Irvine, and matching the right material to your existing installation matters for both warranty coverage and structural performance. The ArmorTec series, with its thermoset polymer surface layer, is what you’ll find on most Irvine kitchen patios and outdoor cooking areas installed after 2015. The Olde World collection, thicker at 60mm versus ArmorTec’s 50mm, was common on pre-2010 jobs and requires a deeper excavation if you’re replacing rather than overlaying.

To identify your existing Cambridge material, flip a loose paver and look for the stamped manufacturing date and batch code near one corner. The color code, a two-letter designation like “BW” for Bluestone Blend or “SA” for Sahara, must match exactly if you’re patching rather than replacing the full field. Cambridge’s color formulas shift slightly between production runs, so a 2019 “SA” and a 2024 “SA” may read as different tones under Irvine’s afternoon sun.

We source direct from Cambridge’s West Coast distribution in Ontario, California, which carries current stock and can often match discontinued colors from archived batches. For repairs under ten square feet, we sometimes recommend Cambridge’s factory seconds program, sold as “Architectural Select” - same spec, minor surface variation, at roughly 60 percent of list. We’re an independent service provider with no affiliation to Cambridge Pavers, though we’ve installed their materials on 340-plus projects since 2007.

Signs Your Cambridge Pavers Kitchen Remodeling Is Failing

• Efflorescence blooming white on the surface. This salt deposit indicates moisture is migrating through the paver body, usually because the original installer skipped the geotextile fabric layer or used non-permeable polymeric sand that trapped water. In Irvine’s clay-heavy soil, especially near the lower elevations of Northwood and Woodbridge, this accelerates after the occasional heavy winter storm.
• Pavers rocking underfoot or sounding hollow when tapped. The bedding sand layer has washed out or compacted unevenly, often where downspouts discharge directly onto the patio. Cambridge specifies a 1-inch screeded sand bed over 6 inches of compacted Class II base rock; shortcuts here show up in year three to five.
• Chipped edges on the wearing surface. ArmorTec’s polymer face is roughly 3/16-inch thick; once it’s compromised, the concrete body underneath erodes quickly. This happens most often where grill carts or kitchen islands get dragged across the pavers without protection.
• Joint sand disappearing and weeds establishing. Polymeric sand failure means the binding agent broke down, usually from premature water exposure during cure or use of a non-Cambridge-approved product. We see this frequently on DIY touch-ups where the homeowner used standard play sand.
• Visible settlement toward the house foundation. This is the critical one. If the patio pitches toward rather than away from the structure, water is being directed at your kitchen’s slab or stem wall. Cambridge’s installation manual calls for 1/4 inch per foot minimum slope; in practice, we measure with a laser level and won’t sign off until it’s right.

Before

After

Replacement Cost & What’s Included

Full Cambridge Pavers kitchen remodeling in Irvine runs $14,000-$45,000, with the final number driven by three factors: square footage, whether we’re removing existing concrete or pavers, and whether the project includes structural elements like a pergola footing or outdoor kitchen base. A typical 200-square-foot kitchen patio replacement, including demolition of the existing field, 6-inch compacted base, bedding sand, Cambridge ArmorTec installation, and polymeric sand jointing, lands around $18,500-$24,000.

Here’s how that breaks down on our written quotes:

Under Clause 1 of the Haven Standard, that written price is delivered before any work starts. No change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation workmanship, and Cambridge’s material warranty, 25 years on ArmorTec for residential use, transfers to you with the documentation we file.

DIY or Call Us?

There’s a clear line between what an Irvine homeowner can safely assess and what requires the equipment and sequencing we bring. You can check slope with a 4-foot level and a piece of scrap wood, confirm whether downspouts are dumping onto the patio, and photograph the paver stamps for us to identify. What you shouldn’t attempt: full excavation near gas lines or electrical conduit that often runs to outdoor kitchens, compaction of base rock without a plate compactor and moisture control, or cutting pavers with a wet saw without proper respirator protection for silica dust.

The most expensive mistake we see is the homeowner who removes ten square feet, realizes the base is compromised underneath, and has created a drainage trap that funnels water toward the house. Measure twice, build it once, write it down. If you’re past the assessment stage, call (657) 227-2502 and we’ll schedule a free estimate with a written scope and price.

FAQs